Free Consultant
Hỗ trợ tại Hà Nội
Hỗ trợ tại TP.HCM
Hỗ trợ kỹ thuật
Bộ phận kinh doanh

WatchGuard AP200

Wireless Access Point

WatchGuard AP200 Wireless Access Point

Please note: Watchguard Wireless APs need to be managed by a Watchguard Firewall and will not operate as stand-alone access points.

WatchGuard AP200 Overview:

The mass adoption of smart wireless devices like tablets, smartphones and notebooks is driving the BYOD (bring your own device) explosion, putting ever increasing demands on wireless networks. This pressure, coupled with the “wild west” nature of WLAN, means it is now more important than ever to have control of your entire network – both wired and wireless – with best-in-class security, integrated security policies, and increased visibility.

Extend best-in-class UTM security to the WLAN

Protecting against today’s sophisticated blended threats requires multiple security capabilities, and these threats don’t discriminate between a wired or wireless network path to their targets. WatchGuard’s AP100 and AP200 meet this challenge by extending best-in-class UTM security – including application control, intrusion prevention, URL and web content filtering, virus and spam blocking and more – from the XTM to the WLAN. With the AP100 and AP200, businesses can harness the power of mobile devices without putting network assets at risk.

Integrate wired and wireless security policies

WatchGuard’s AP100 and AP200 allow users to easily apply security policies to wired and WLAN resources simultaneously , which is critical to enforcing security standards across the entire network infrastructure. And updating integrated policies couldn’t be simpler – creating huge IT time-savings.

Unified device management

Unified device management tools offer a “single pane of glass” view into network security activities and allow users to configure and manage their AP100/AP200 and XTM devices from one place – reducing both setup time and maintenance costs.

What’s behind the AP100 and AP200:

  • Best-in-class hardware - WatchGuard’s wireless access points are built using the latest generation of wireless hardware, incorporating advanced technologies to deliver 2x2 MIMO with dual spatial streams capable of handling data rates up to 600 Mbps.
  • Ease of management - With unified management tools, administrators can easily manage both their AP devices and XTM appliances from a single console.
  • Strong security - Features like MAC filtering, client reporting, Captive Portal technology, 802.1X authentication, and PCI compliant scan and reporting, ensure a strong WLAN security stance.
  • Simple roaming - WatchGuard AP devices have you covered, with up to 16 SSIDs, and seamless network access when roaming between access points.
  • Great coverage, low profile - Powerful radios and internal antennas housed in a sleek design allow for maximum coverage with a subtle deployment profile, suitable for any space.
  • Flexible power options - Power options include Power Over Ethernet (PoE), A/C adapter (included), and PoE injector (optional) for maximum deployment flexibility. AP200’s plenum enclosure offers safety code compliance for those who need it.
  • Lower TCO - Realize big cost savings, with no separate controller hardware costs, no per-AP “seat” charges, and no controller software license fees.

Product View:

WatchGuard Access Point front view

Watchguard Access Point - Back View

WatchGuard Access Point Diagram


Access Points AP100 AP200
Hardware Details
Number of Radios 1 2
Supported Frequencies (summary) 2.4GHz or 5GHz (selectable) Radio 1 = 5GHz, Radio 2 = 2.4GHz
Radio characteristics 2x2 MIMO Dual Spatial Streams
Supported Frequencies* 2,400-2.474GHz, 5.150-5.250GHz, 5.250- 5.350GHz, 5.470-5.725GHz, 5.725-5.850GHz
Antenna 4 internal, omnidirectional
Peak Antenna Gain 3 dBi 4 dBi, 3 dBi
Maximum TX Power* 2.4GHz = 17dBm 5GHz = 20DBm Hz = 20dBm, 2.4GHz = 21dBm
Throughput 300 Mbps 600 Mbps
SSID 8 16
Plenum Enclosure (fire resistant) No Yes
Security Settings WPA-PSK, WPA2-PSK, WPA2-PSK Mixed, WPA2- Enterprise 802.1x, TKIP, AES
Ethernet 1GBe
Power Options PoE, A/C Adapter
MTBF > 500,000 Hours
Physical Security Kensington Lock
IEEE Standards Supported 802.11a/b/g/n, 802.11i, 802.11x, 802.11af/at
Support & Maintenance 1-year or 3-year subscription to LiveSecurity® Service for hardware warranty with advance hardware replacement, technical support, software updates - included with purchase
Deployment Indoors
Environmental Information
Operating Temperature 32 to 104 F° (0 to 40° C)
Operating Relative Humidity 5% to 90% Non-condensing
Storage Temperature -40 to 158° F (-40° to 70° C)
Non-Operating Relative Humidity 5% to 90% Non-condensing
AC Power Adapter
Input Voltage 100 - 240V AC
Frequency 50/60Hz
Input Current Maximum 400mA
Output Voltage 12V
Output Current 1250mA
PoE Injector (optional)
IEEE Standard 802.3af
Input Voltage 100-240V AC
Output Voltage 56V
Output Power 15.4W
Product Dimensions 6.5" RD x 1.75" H (16.5 x 4.4 cm)
Shipping Dimensions 7" x 7.25" x 4.5" (17.8 x 18.4 x 11.4 cm)
Product Weight .75 lbs (.34 kg)
Shipping Weight (includes A/C adapter, mounting kit, etc.) 2 lbs (.91 kg)
Mounting Kit Included
QoS 8 priority queues, DiffServ, modified strict queuing
IP Address Assignment Static, DynDNS, PPPoE, DHCP (server, client, relay)
NAT Static, dynamic, 1:1, IPSec traversal, policy-based

*Country-specific restrictions apply


Suggested Number of Access Points by XTM Model
Please note: WatchGuard XTM Firmware must be 11.7.2 or higher.
Models: XTM 2 Series XTM 3 Series XTM 5 Series XTM 8 Series XTM 800 Series XTM 1050 XTM 1500 Series XTM 2050 XTM 2520
Number† of Access Points Up to 5 Up to 15 Up to 35 Up to 70 Up to 100 Up to 100 Up to 100 Up to 100 Up to 100

**Not available on XTM 21, 22, 23 models
†Number of Access Points is not restricted by license


Please note: Watchguard Wireless APs need to be managed by a Watchguard Firewall and will not operate as stand-alone access points.

Nhà phân phối chính thức thiết bị Tường Lửa WatchGuard tại Việt Nam